• Wilkerson Operations manufactures a complete line of compressed air treatment and control products.

• Founded in 1948, Wilkerson manufactures and markets compressed air components such as filters, regulators and lubricators (FRL’s), air dryers, separators, drains and many other components used in air preparation.  Our quality products meet a wide variety of industrial, process, consumer and health care applications.

• Wilkerson manufactures and market compressed air components such as: new modular design filters, regulators, lubricators (frl’s), air dryers, separators, drains, compressor room products and many other components used in air preparation.

• Diaphragm Relief Valves;  Drain Valves;  Diverter Blocks;  Electronic Proportional Valves;  Emergency Stop Valves; Exhaust Mufflers / Silencer;  External Drains;  Liquid Separators;  Membrane Dryers;  Pressure Switches;  Slow-Start Valves

• Manufacturers of precision controls devices, electro-pneumatic I/P, E/P and P/I transducers, rolling diaphragm precision regulators and lubricators.

• Airtrol Components' line of miniature pneumatic components are designed for use in light to medium duty applications where small size, light weight and precision are a must. Typical applications include medical and dental equipment, laboratory/analytical instruments, HVAC applications, test equipment, and process control/automation

• Filters, regulators, twin tower dryers, stainless steel food grade filters and refrigerator dryers.

• Reading technologies point of application water/oil removal systems.

Please contact Nor-Cal Controls for catalog information on this product line.

• REFRIGERATED AIR DRYERS - Dri-Aire offers a full range of refrigerated air dryers and normally has in stock for immediate shipment of our models DA-10 to DA-1000.

• Models DA-25 and larger all include adjustable electric auto drain, metal separator bowl and on-off switch.

• We also offer our unique combination after-cooler/air dryer (others call them “Hi Inlet Temp” dryers) that incorporates a true after-cooler along with a refrigerated air dryer. These units can handle 200°F inlet compressed air at 100 PSIG. Standard equipment includes two separators, two adjustable electric drains and an on-off switch. 

• Also available are our economy line (“ED” series) dryers with float type* drain and no rewarm circuit. “ED” dryers are available in the 25 to 100 CFM range

• Standard Dryer Sizes 10 CFM to 2500 CFM; High Inlet Air Temperature Dryers; Water or Air Cooled Direct Expansion Dryers; Water or Air Cooled Chiller Type Dryers; Cycling Dryers

• TWIN TOWER REGENERATIVE DRYER - Dri-Aire also proudly offers a line of twin-tower regenerative compressed air dryers in both heatless and external blower purge heated types.

• Reliability is the keyword with our units.

• On our models HL-80 and larger, Dri-Aire uses four independent valves (each controlled by filtered pilot air) rather than a sliding spool type valve. What does this mean to the customer? Less maintenance and less downtime!

• Our DAHR series twin-tower dryers range from 6 CFM to 50 CFM. All regenerative air dryers require a coalescing pre-filter and particulate after-filter.

• Heatless Dryers Blower Purge Dryers Dew point Monitors Purge Economizer Controls

• WATER CHILLERS -  Dri-Aire offers a wide range (from small to large) of water chillers for a myriad of industrial applications.

• Typical uses are closed loop cooling systems, food processing, fluid cooling, heat transfer applications, chiller rolls, air compressors, hydraulic heat exchangers, and many other applications.

• Our design allows power savings with unloaders that reduce power consumption when water temperature is maintained.

• Optional equipment includes pumps and digital water temperature readouts.

• AFTER-COOLERS - After-coolers are available in a wide range of CFM ratings and voltages.

• Depending on the model, cabinets are either steel with baked enamel finish or galvanized steel.

• Pressure and temperature ratings for all models are 250 PSIG maximum operating pressure and 350°F maximum operating temperature.

• Also available are moisture separators which must be installed at the exit of an after-cooler to remove collected condensates.

• Separators include a float type auto drain (or may be equipped with an adjustable electric timed auto drain).

• Air Cooled After-coolers Water Cooled After-coolers

• AIR COOLED FLUID COOLER - To save costly city or well water, CLWC’s save customers thousands of dollars per year. In many cases, the repayment time is less than one year. These are used to cool air compressors, hydraulic oil coolers, welders and many other applications.

• Trim cooler packages available for when ambients are above 95°F. Water pump package available for circulating water through system.

• Closed Loop Water Saving Systems; 3-Way Thermostatic Mixing Valves; Trim Coolers; Trim Water Modulating Valve; Single Pump System; Dual Pump System; Accessories, Gauges, Pressure, Temperature, Air Plunger, Air Vent, Expansion Tank

• Closed Loop Water Saving Sytems 3-Way Thermostatic Mixing Valves Trim Coolers Trim Water Modulating Valve Single Pump System Dual Pump System Accessories, Gauges, Pressure, Temperature, Air Plunger, Air Vent, Expansion Tank

RIETSCHLE THOMAS - FACTORY AUTHORIZED REPAIR CENTER

We are members of: